Pentek Homepage
Follow Us On LinkedIn Follow Us On Twitter Follow Us On YouTube Follow Us On Google Follow Us On Facebook Register AccountRegister Login AccountSign In
Board Selector   |  Recorder Selector   |  

Your Pentek With YourPentek, you can be notified when new documentation and other updated product information is available for the Model 6606. Please login or register to manage your profile.

Model 6606 8-Channel Anti-Aliasing Filter

Discontinued product - contact factory for availability

Block Diagram




Life Cycle Management

Ordering & Warranty


  • 8-channel low pass filter for alias protection
  • 800 kHz or, optionally, 8 MHz cutoff frequency
  • LC-type, 9-pole Chebycheff response
  • 60 dB minimum stopband attenuation
  • Front panel SMA connector inputs and 37-pin "D" connector outputs
  • Pin-to-pin compatibility with Models 6106 and 6109 A/Ds


Model 6606


Model 6606 Block Diagram

Please refer to the product datasheet for a larger version of the block diagram

Hardware and Software Manuals - ( top )

Please note that some hardware and software manuals are used for more than one Pentek product. Although the model numbers given in the description of each manual below may vary, these manuals are all used for the product described on this web page.

Part No.
800.66060 Operating Manual 8-Channel Anti-Aliasing Filter 1.0 (4/16/2012)

CONNECT ON SOCIAL:  Follow Us On Facebook Follow Us On LinkedIn Follow Us On Twitter Follow Us On Google+ Follow Us On YouTube

Pentek, Inc. • One Park Way, Upper Saddle River, NJ, 07458, USA
Tel: +1 (201) 818-5900 • Fax: +1 (201) 818-5904 • Map + Directions
Site Map • Copyright © 2018 Pentek, Inc. All Rights Reserved.