Pentek Homepage
Follow Us On LinkedIn Follow Us On Twitter Follow Us On YouTube Follow Us On Google Follow Us On Facebook Register AccountRegister Login AccountSign In
Board Selector   |  Recorder Selector   |  
Search:  
Home > Products > Model 7250

Your Pentek With YourPentek, you can be notified when new documentation and other updated product information is available for the Model 7250. Please login or register to manage your profile.

Model 7250 Quad 200 MHz, 16-bit A/D with Virtex-5 FPGAs - 6U cPCI

Not recommended for new designs. Contact Pentek for more information.

Block Diagram

Datasheet

Manuals

Software

Literature

Life Cycle Management

Ordering & Warranty

Catalogs

 
  • Model 7x50 TechCast presentation
  • Complete software radio interface solution
  • Four 200 MHz 16-bit A/Ds
  • Up to 1.5 GB of DDR2 SDRAM
  • Two Xilinx Virtex-5 FPGAs
  • Up to 2.56 seconds of data capture at 200 MHz
  • LVPECL clock/sync bus for multiboard synchronization
  • 32 pairs of LVDS connections to the Virtex-5 FPGAs for custom I/O

 

Model 7250

 

Model 7250 Block Diagram

Please refer to the product datasheet for a larger version of the block diagram


Hardware and Software Manuals - ( top )

Please note that some hardware and software manuals are used for more than one Pentek product. Although the model numbers given in the description of each manual below may vary, these manuals are all used for the product described on this web page.

Part No.
Type
Description
Revision/Date
800.71500 Operating Manual Model 7150 Quad 200 MHz, 16 bit A/D PMC/XMC Module A.5 (3/17/2014)
800.72500 Installation Guide Model 7250 Quad/Octal 200 MHz, 16 bit A/D 6U cPCI Board A (6/7/2010)
801.71501 Programmer's Reference ReadyFlow Board Support Libraries for Model 7150 1.1B (5/13/2010)
809.7x500 Supplemental Manual Vendor Data Sheets for Model 7x50 Series Operating Manuals A (3/22/2010)
813.71500 User's Guide Model 4996A Option 150 VxWorks ReadyFlow BSP for Model 7150 1.1A (5/13/2010)
815.71500 User's Guide Model 4995A Option 150 Windows ReadyFlow BSP for Model 7150 1.3A (5/13/2010)
816.71500 User's Guide Model 4994A Option 150 Linux ReadyFlow BSP for Model 7150 1.0 (5/29/2012)
Contact Pentek
For Manual
Model 4953 GateFlow FPGA Design Kit for Pentek Modules for Model 7250

Software Products - ( top )

Model
Option
Description
4953 150 GateFlow FPGA Design Kit for Pentek Modules
4994A 150 ReadyFlow Board Support Packages (BSPs) for Linux
4995A 150 ReadyFlow Board Support Packages (BSPs) for Windows
4996A 150 ReadyFlow Board Support Packages (BSPs) for VxWorks



CONNECT ON SOCIAL:  Follow Us On Facebook Follow Us On LinkedIn Follow Us On Twitter Follow Us On Google+ Follow Us On YouTube

Pentek, Inc. • One Park Way, Upper Saddle River, NJ, 07458, USA
Tel: +1 (201) 818-5900 • Fax: +1 (201) 818-5904 • Map + Directions
Site Map • Copyright © 2017 Pentek, Inc. All Rights Reserved.