|Home > What's New > AUSA, WASHINGTON DC - October 14, 2019|
AUSA, WASHINGTON DC - October 14, 2019 - Pentek. Inc, Herrick Technology Laboratories, Inc. and Kontron, have developed products aligned with the Sensor Open Systems Architecture" (SOSA") Technical Standard that are used in a new 3U VPX demonstrator system designed to illustrate the capabilities of open systems architectures. This 3U VPX system is ideal for electronic warfare (EW), SIGINT, radar and communications applications. The flight-qualified chassis utilizes open architecture modules, from multiple suppliers, for a complete functional demonstration system.
"Herrick Technology Laboratories, Inc. of Germantown, MD, and another major U.S. system integrator have received shipments of the Kontron VX305C-40G SOSA aligned SBC for U.S. defense community applications," said Mark Littlefield, Kontron's vertical product manager for Defense and SOSA standard contributor. He added, "Herrick has integrated this SBC with a Model 71813 XMC board from Pentek which provides customizable I/O signal status and control for their new SOSA C4ISR demonstrator system for the U.S. Army." For more information, please visit Kontron AUSA booth # 2942
The SOSA Consortium is chartered with creating a common framework for transitioning sensor systems to an open systems architecture, based on key interfaces and open standards established by industry-government consensus. The benefits of this architecture include improved interoperability, as well as reduced development time, deployment and costs.
The SOSA approach establishes guidelines for Command, Control, Communications, Computers, Intelligence, Surveillance and Reconnaissance (C4ISR) systems. The objective is to allow flexibility in the selection and acquisition of sensors and subsystems that provide sensor data collection, processing, exploitation, communication and related functions over the full life cycle of the C4ISR system.
The C4ISR demonstrator system, in an HTLv-C-19 chassis, with 16 payload slots and 3 power supply slots, includes:
The system level interfaces are also aligned with the SOSA Technical Standard to maximize the chassis level interoperability. The backplane is designed to support 100 Gigabit Ethernet (GigE) Data Plane, PCIe-Gen 4 Expansion Plane and 10 GigE Control Plane. The HTLv-C-19 chassis uses the SOSA aligned front panel I/O connector definitions. It is also designed to the VITA 48.2 VPX REDI conduction cooling standard for rugged environments.
"The Pentek Jade Model 71813 directly addresses I/O needs called out in the emerging SOSA standards," said Paul Mesibov, Pentek's chief technical officer and active member of the SOSA standard Hardware Working Group. "Pentek is working with other SOSA members and is committed to lending our experience in meeting open system architecture challenges."
"Herrick's SOSA demonstrator project is an important, fast-paced effort to demonstrate the value of Open Systems Architectures for defense sensor platforms," said Acie Vickers, CEO and President of Herrick Technology Laboratories, Inc. "By providing key components for this design, Kontron and Pentek are helping to deliver on the OSA promise of faster and simplified technology updates for defense sensor platforms."
All of the following modules are designed to support the open systems architecture of the SOSA approach.
The Herrick Technology Laboratories HTLv-1 and HTLv-2 are 3U OpenVPX quad and dual channel HF/VHF/UHF software defined radio transceiver modules designed to support various missions. The PNTRv is also a 3U VPX module that provides position, navigation and timing information to the chassis via GPS and Chip-Scale Atomic Clock.
The Kontron VX305C-40G 3U VPX SBC utilizing a 12-core Intel® Xeon® D processor, with 40 Gigabit Ethernet Data Plane (40GBASE-KR4), a 4-lane PCI Express 3.0 expansion plane, dual 10 Gigabit Ethernet Control Plane (10GBASE-KR), and a rich assortment of user I/O including SAT III, USB (2 and 3), serial links, video (HDMI, with DisplayPort available in 2019), GPIO, and an XMC site with backplane user mapping.
The Pentek Model 71813 is based on the Xilinx Kintex Ultrascale FPGA and features 28 pairs of LVDS digital I/O to meet the requirements of emerging standards from The Open Group SOSA Consortium of which Pentek is a member.
Herrick Technology Laboratories, Inc. (HTL) is a leading provider of high performance, SIGINT/EW/Communications products and systems to the U.S. Department of Defense. HTL designs and manufactures integrated hardware and software products and systems implemented through a Core Software Defined Radio (SDR) platform. The SDR platform incorporates high performance, multi-channel RF and microwave receive and transmit (transceiver) functionality along with mission specific firmware/software applications. HTL products are deployed in demanding mission environments, requiring best in class SWaP-C (Size, Weight and Power-Cost).
Kontron is a global leader in embedded computing technology (ECT). As a part of technology group S&T, Kontron offers a combined portfolio of secure hardware, middleware and services for Internet of Things (IoT) and Industry 4.0 applications. With its standard products and tailor-made solutions based on highly reliable state-of-the-art embedded technologies, Kontron provides secure and innovative applications for a variety of industries. As a result, customers benefit from accelerated time-to-market, reduced total cost of ownership, product longevity and the best fully integrated applications overall.
Pentek, Inc., an ISO 9001:2015 certified company, designs and manufactures innovative commercial and rugged DSP boards and real-time system recorders for commercial, government and military systems including radar, communications, SIGINT, defense, medical and industrial control applications. Pentek offers powerful VPX, FMC, FMC+, AMC, XMC, cPCI and PCIe board solutions featuring high-performance Xilinx FPGAs. Pentek equips all boards and recorder products with high-performance I/O including gigabit serial interfaces, powerful software development tools and offers strong DSP software support.
For the latest pricing, delivery and available options, please fill out this form and your request will be delivered to the appropriate department. To learn more about our products or to discuss your specific application please email our sales department at email@example.com, contact your local representative or Pentek directly:
One Park Way
Upper Saddle River, NJ 07458
Tel: +1 (201) 818-5900
Fax: +1 (201) 818-5904
Map + Directions
|CONNECT ON SOCIAL:|