3
Pentek Homepage
Follow Us On LinkedIn Follow Us On Twitter Follow Us On YouTube Follow Us On Facebook Register AccountRegister Login AccountSign In
Board Selector   |  Recorder Selector   |  
Search:  

Your Pentek With YourPentek, you can be notified when new documentation and other updated product information is available for the Model 7141-703. Please login or register to manage your profile.

Model 7141-703 Dual Digital Up/Downconverter Ruggedized with Virtex-II Pro FPGA - PMC/XMC

This product is no longer available. Contact Pentek for more information.

Block Diagram

Datasheet

Manuals

Literature

Life Cycle Management

Ordering & Warranty

Catalogs

Free Lifetime Support

 
  • Complete software radio transceiver solution
  • VITA 42.0 XMC compatible
  • Two 125 MHz 14-bit A/Ds
  • Four digital downconverters
  • One digital upconverter
  • Two 500 MHz 16-bit D/As
  • 512 MB of DDR SDRAM
  • Up to 1.28 seconds of delay or data capture at 100 MHz
  • Dual timing buses for independent input and output clock rates
  • LVDS clock/sync bus for multi-module synchronization
  • 28 pairs of LVDS connections to the Virtex-II Pro FPGA for custom I/O on P4
  • Optional factory-installed IP Cores available

 

Model 7141-703

 

Model 7141-703 Block Diagram

Please refer to the product datasheet for a larger version of the block diagram


Hardware and Software Manuals - ( top )

Please note that some hardware and software manuals are used for more than one Pentek product. Although the model numbers given in the description of each manual below may vary, these manuals are all used for the product described on this web page.

Part No.
Type
Description
Revision/Date
800.71410 Operating Manual Model 7141 Dual-Channel Multiband Transceiver PMC/XMC Module A.4 (6/15/2010)
800.71411 Addendum Model 7141 Option 703 CCA PMC Installation A.1 (6/25/2010)
801.71401 Programmer's Reference Model 4999 Opt.140/141, ReadyFlow Board Support Libraries Model 7140/7141 1.1B (1/21/2008)
803.71400 User's Guide Model 4996 Option 140/141/142, VxWorks Driver for Model 7140/7141/7142 2.3A (1/18/2008)
805.71400 User's Guide Model 4995 Option 140/141/142, Windows Driver for Model 7140/7141/7142 2.3B (1/18/2008)
806.71400 User's Guide Model 4994 Option 140/141/142, Linux Driver for Model 7140/7141/7142 2.3A (1/18/2008)
809.71410 Supplemental Manual Vendor Data Sheets for Model 7x41 Series Operating Manuals A (11/12/2008)
820.71410 User's Guide Getting Started Guide for Model 7141 A (10/7/2010)



CONNECT ON SOCIAL:  Follow Us On Facebook Follow Us On LinkedIn Follow Us On Twitter Follow Us On YouTube

Pentek, Inc. • One Park Way, Upper Saddle River, NJ, 07458, USA
Tel: +1 (201) 818-5900 • Fax: +1 (201) 818-5904 • Map + Directions • Site Map
Terms of Use • Privacy Policy • Copyright © 2024 Pentek, Inc. All Rights Reserved.