Pentek Homepage
Follow Us On LinkedIn Follow Us On Twitter Follow Us On YouTube Follow Us On Google Follow Us On Facebook Register AccountRegister Login AccountSign In
Board Selector   |  Recorder Selector   |  

Your Pentek With YourPentek, you can be notified when new documentation and other updated product information is available for the Model 6514. Please login or register to manage your profile.

Model 6514 16-Channel 2-Input Narrowband Digital Receiver

This product is no longer available. Contact Pentek for additional information.

Block Diagram




Life Cycle Management

Ordering & Warranty


  • Sampling rate to 70 MHz
  • Dynamic range greater than 100 dB
  • 0.008 Hz tuning resolution
  • Four 'C40 comm port data outputs
  • Two TTL or ECL inputs and FIFO buffering
  • Tuning control over VMEbus, or 'C40 comm port inputs
  • Compatible A/D's available (see Analog I/O section)


Model 6514


Model 6514 Block Diagram

Please refer to the product datasheet for a larger version of the block diagram

Hardware and Software Manuals - ( top )

Please note that some hardware and software manuals are used for more than one Pentek product. Although the model numbers given in the description of each manual below may vary, these manuals are all used for the product described on this web page.

Part No.
800.28030 Operating Manual Instruction Manual for Pentek P/N 2803-001 and 2803-002 Connecting Cables A (11/13/2000)
800.65140 Operating Manual Model 6514 16-Channel Digital Receiver with TMS320C40-Compatible Comm Port A.2 (5/7/1999)

CONNECT ON SOCIAL:  Follow Us On Facebook Follow Us On LinkedIn Follow Us On Twitter Follow Us On Google+ Follow Us On YouTube

Pentek, Inc. • One Park Way, Upper Saddle River, NJ, 07458, USA
Tel: +1 (201) 818-5900 • Fax: +1 (201) 818-5904 • Map + Directions
Site Map • Copyright © 2018 Pentek, Inc. All Rights Reserved.