Pentek Homepage
Follow Us On LinkedIn Follow Us On Twitter Follow Us On YouTube Follow Us On Google Follow Us On Facebook Register AccountRegister Login AccountSign In
Board Selector   |  Recorder Selector   |  

Your Pentek With YourPentek, you can be notified when new documentation and other updated product information is available for the Model 6235-404. Please login or register to manage your profile.

Model 6235-404 Dual Wideband 4k FFT Receiver - VIM

This product is no longer available. Contact Pentek for more information.

Block Diagram




Life Cycle Management

Ordering & Warranty


  • Dual 12-bit 105 MHz A/Ds
  • Dual wideband receivers
  • Built-in real-time 105 MHz 1k or 4k FFT Processor
  • Radar preprocessor
  • Energy detection for signal intelligence receivers
  • Offloads DSP processing
  • Suitable for IF signals up to 150 MHz
  • Ready To Use - No FPGA programming required


Model 6235-404


Model 6235-404 Block Diagram

Please refer to the product datasheet for a larger version of the block diagram

Hardware and Software Manuals - ( top )

Please note that some hardware and software manuals are used for more than one Pentek product. Although the model numbers given in the description of each manual below may vary, these manuals are all used for the product described on this web page.

Part No.
800.62350 Operating Manual Model 6235 2-Channel Wideband Digital Receiver VIM-2 Module B.1 (10/23/2006)
801.62350 User's Guide Model 4999 ReadyFlow Board Support Libraries for Model 6235/6236 3.1 (7/2/2004)

CONNECT ON SOCIAL:  Follow Us On Facebook Follow Us On LinkedIn Follow Us On Twitter Follow Us On Google+ Follow Us On YouTube

Pentek, Inc. • One Park Way, Upper Saddle River, NJ, 07458, USA
Tel: +1 (201) 818-5900 • Fax: +1 (201) 818-5904 • Map + Directions
Site Map • Copyright © 2018 Pentek, Inc. All Rights Reserved.