Pentek Homepage
Follow Us On LinkedIn Follow Us On Twitter Follow Us On YouTube Follow Us On Google Follow Us On Facebook Register AccountRegister Login AccountSign In
Board Selector   |  Recorder Selector   |  

Your Pentek With YourPentek, you can be notified when new documentation and other updated product information is available for the Model 6099A. Please login or register to manage your profile.

Model 6099A 64-512 MByte High-Speed Buffer Memory VME Board

This product is no longer available. Contact Pentek for additional information.

Block Diagram




Life Cycle Management

Ordering & Warranty


  • 64–512 MB swinging buffer memory
  • 8-bit, 16-bit, or 32-bit data up to 140 MB/sec
  • 280 MB/sec aggregate data rate
  • VME slave interface with DMA controller
  • Two on-board 'C40s for sophisticated memory addressing
  • Four 'C40 comm port front panel interfaces
  • Compatible with Series 64xx A/D's and Digital Receiver products
  • Programmable high-speed digital delay


Model 6099A


Model 6099A Block Diagram

Please refer to the product datasheet for a larger version of the block diagram

Hardware and Software Manuals - ( top )

Please note that some hardware and software manuals are used for more than one Pentek product. Although the model numbers given in the description of each manual below may vary, these manuals are all used for the product described on this web page.

Part No.
800.60990 User's Guide Model 6099 Buffer Board for VMEbus Systems A (11/17/1998)
800.60992 Installation Guide Firmware Replacement Guide for the Model 6099A A (8/30/2000)
800.6099A Operating Manual Model 6099A Buffer Board for VMEbus Systems B.3 (3/22/2001)
800.6099X Supplemental Manual Tundra SCV64 Manual 0.01 (11/9/1999)
801.6099A User's Guide Model 4999 ReadyFlow Board Support Libraries for Model 6099A 2.2 (10/20/2000)

CONNECT ON SOCIAL:  Follow Us On Facebook Follow Us On LinkedIn Follow Us On Twitter Follow Us On Google+ Follow Us On YouTube

Pentek, Inc. • One Park Way, Upper Saddle River, NJ, 07458, USA
Tel: +1 (201) 818-5900 • Fax: +1 (201) 818-5904 • Map + Directions
Site Map • Copyright © 2018 Pentek, Inc. All Rights Reserved.