Pentek Homepage
Follow Us On LinkedIn Follow Us On Twitter Follow Us On YouTube Follow Us On Google Follow Us On Facebook Register AccountRegister Login AccountSign In
Board Selector   |  Recorder Selector   |  

Your Pentek With YourPentek, you can be notified when new documentation and other updated product information is available for the Model 4256. Please login or register to manage your profile.

Model 4256 RS-232C Serial I/O and XDS Adapter

This product is no longer available. Contact Pentek for more information.



Life Cycle Management

Ordering & Warranty



The Pentek Model 4256 is a high-performance RS-232 serial interface compatible with the Intel Multibus II MIX Module Design Specification for a MIX Slave device. This standard is employed by the Pentek Mode1 4283 VMEbus DSP card as an expansion bus interface. Up to three Model 4256 boards may be stacked upon a single Mode1 4283. The Mode1 4256 may also be used with other MIX modules satisfying a wide variety of I/O configurations.


Hardware and Software Manuals - ( top )

Please note that some hardware and software manuals are used for more than one Pentek product. Although the model numbers given in the description of each manual below may vary, these manuals are all used for the product described on this web page.

Part No.
800.00300 Installation Guide MIX Stack Assembly Quick Reference A (2/9/2000)
800.42560 Operating Manual Model 4256 RS-232C Interface MIX Module A (6/1/1992)
800.42561 Installation Guide Cable Holddown for Model 4256 A (5/7/1999)

CONNECT ON SOCIAL:  Follow Us On Facebook Follow Us On LinkedIn Follow Us On Twitter Follow Us On Google+ Follow Us On YouTube

Pentek, Inc. • One Park Way, Upper Saddle River, NJ, 07458, USA
Tel: +1 (201) 818-5900 • Fax: +1 (201) 818-5904 • Map + Directions
Site Map • Copyright © 2018 Pentek, Inc. All Rights Reserved.