Pentek Homepage
Follow Us On LinkedIn Follow Us On Twitter Follow Us On YouTube Follow Us On Facebook Register AccountRegister Login AccountSign In
Board Selector   |  Recorder Selector   |  
Home > Products > Model 6229

Your Pentek With YourPentek, you can be notified when new documentation and other updated product information is available for the Model 6229. Please login or register to manage your profile.

Model 6229 Dual Digital Upconverter and D/A - VIM

Please contact Pentek for availability.

Block Diagram




Life Cycle Management

Ordering & Warranty


Free Lifetime Support

  • VIM-2 module for VIM compatible processor boards
  • Translates digital signals to HF or IF frequencies as high as 80 MHz
  • Provides two identical, independent channels
  • Interpolation filter, complex digital mixer and programmable digital LO
  • 12-bit 200 MHz D/A covers DC to 80 MHz output range
  • Lowpass or bandpass output filters for baseband or IF analog outputs
  • Synthesized signal generator mode
  • Synchronization across multiple modules


Model 6229


Model 6229 Block Diagram

Please refer to the product datasheet for a larger version of the block diagram

Hardware and Software Manuals - ( top )

Please note that some hardware and software manuals are used for more than one Pentek product. Although the model numbers given in the description of each manual below may vary, these manuals are all used for the product described on this web page.

Part No.
800.00002 Miscellaneous VIM Specification E (6/10/2004)
800.62290 Operating Manual Dual Digital Upconverter and D/A Converter for Pentek VIM Motherboards B.3 (12/29/2003)
801.62290 User's Guide Model 4999 ReadyFlow Board Support Libraries for Model 6229 6.5 (12/30/2003)
803.62290 User's Guide Model 4996 Option 229, VxWorks Driver for Model 6229 2.0 (6/1/2011)

CONNECT ON SOCIAL:  Follow Us On Facebook Follow Us On LinkedIn Follow Us On Twitter Follow Us On YouTube

Pentek, Inc. • One Park Way, Upper Saddle River, NJ, 07458, USA
Tel: +1 (201) 818-5900 • Fax: +1 (201) 818-5904 • Map + Directions • Site Map
Terms of Use • Privacy Policy • Copyright © 2022 Pentek, Inc. All Rights Reserved.