|Home > What's New > AUSVI, Washington, DC - August 16, 2011|
AUSVI, Washington, DC - August 16, 2011 - Pentek, Inc., today announced the first in a planned family of instruments targeting operation in harsh environments: the Model RTR 2746 real-time data recording and playback instrument. The configurable, multi-channel instrument can digitize analog inputs at up to 200 MS/sec per channel and stream data to mass storage at an aggregate rate of 1600 MB per second. In the playback mode, it can also reproduce real-time analog outputs from the recorded data files. Remote users can control operation and visualize recorded data, making it suitable for installation in unmanned vehicles. The instrument is designed to meet MIL-STD-810F requirements for operation in harsh environments.
"This new family of ruggedized instruments opens our products to a wider audience," said Rodger Hosking, vice president of Pentek. "We serve a lot of customers who need instruments that are flight-certified or must operate in severe environments. The RTR 2746 specifically targets that requirement."
Pentek collaborated with rugged computer manufacturer Crystal Group in development of these instruments. "We are pleased to team with Pentek on this project," said Scott Kongable, president Crystal Group. "Pentek's recording expertise joined with our rugged computer manufacturing capabilities gives developers a powerful new option for data collection and playback under airborne and other harsh operating conditions."
The RTR 2746 provides real-time 16-bit data capture on multiple simultaneous channels using 200 MHz ADCs and can play back recorded data through 1.25 GHz 16-bit DACs to reproduce the captured signal. Handling signal bandwidths to 80 MHz, the instrument includes built-in digital up- and down-converters that allow a direct interface to IF signal frequencies up to 700 MHz. The instrument supports up to eight data channels with a customer-specified mix of recording and playback capabilities.
The RTR 2746 streams data at 1600 MB per second to or from an array of up to 48 drives in a RAID configuration, providing up to 24 TB of storage. The solid state drives can support RAID levels 0, 1, 5, 6, 10, and 50. The data format used for storage follows the NTFS standard, allowing users to remove drives from the instrument and read the data using standard Windows-based systems, eliminating the need for file format conversion. All drives are removable and can be immediately swapped for minimum downtime.
Based on Crystal Group's 4U server family chassis, the RTR 2746 functions reliably under extreme conditions. Operating temperature is -15°C to +55°C and can stretch to -40°C to +71°C with the use of solid-state drives and a high-temperature CPU. The lightweight aluminum chassis handles vibration up to 4.43 gRMS 50-500Hz and the instrument is rated to operate up to 12,500 ft. altitude. Under transport or storage conditions the RTR 2746 can tolerate -55°C to +85°C at altitudes to 40,000 ft.
The chassis occupies a 4U, 24-in. deep space in a standard 19-inch rack and uses thermally-controlled high-speed fans for cooling. Construction techniques include multiple attachment points on the motherboard, locking mechanisms on all connectors and fasteners, and secured cable dressing to prevent chafing.
As with all Pentek recording instruments, the RTR 2746 comes with the full support of SystemFlow® software for simple system control and operation. The software provides a graphical user interface offering point-and-click configuration, and can store custom configurations for single-click setup. The software also includes signal visualization and analysis tools that allow an operator to monitor signals before, during, and after data collection. These tools include both a virtual oscilloscope and a virtual signal analyzer.
The RTR 2746 has the ability to be controlled remotely through a network connection. This allows the instrument to operate under full manual control in environments unsuitable for humans. In an avionics application, for instance, the instrument could be located in an equipment bay or on an unmanned platform and controlled by a user in the cockpit or at a remote facility.
For the latest pricing, delivery and available options, please fill out this form and your request will be delivered to the appropriate department. To learn more about our products or to discuss your specific application please email our sales department at firstname.lastname@example.org, contact your local representative or Pentek directly:
One Park Way
Upper Saddle River, NJ 07458
Tel: +1 (201) 818-5900
Fax: +1 (201) 818-5904
Map + Directions
|CONNECT ON SOCIAL:|