2
Pentek Homepage
Follow Us On LinkedIn Follow Us On Twitter Follow Us On YouTube Follow Us On Facebook Register AccountRegister Login AccountSign In
Board Selector   |  Recorder Selector   |  
Search:  
Home > What's New > Upper Saddle River, NJ - February 23, 2015

Pentek Introduces Deployable PCIe FMC Carrier with Optical Interface

  • Half size PCIe FMC carrier with Virtex-7 FPGA
  • MTP 12x optical gigabit serial interface
  • Seamless integration with Pentek SPARK PC development system
  • Commercial and extended temperature versions available
Follow Us On Facebook
Follow Us On LinkedIn
Follow Us On Twitter
Follow Us On YouTube  

Pentek, Inc., today introduced the newest member of its FlexorTM line of FMC (FPGA Mezzanine Card) carriers: the Model 7070 PCIe FMC carrier with a Virtex-7 FPGA. As a stand-alone signal processing board, it provides an ideal development and deployment platform for demanding DSP applications. Combined with any of Pentek's FMCs, it creates a complete radar and software radio solution.

The Flexor Model 7070 features a high pin-count VITA 57.1 FMC site, 4 GB of DDR3 SDRAM, PCI Express (Gen. 1, 2 and 3) interface up to x8, optional 12x user-configurable gigabit serial I/O and optional LVDS connections to the FPGA for custom I/O.

The Flexor Model 7070 delivers new levels of I/O performance through the built-in gigabit serial interface with optional optical transceivers, making 12 full duplex optical lanes available to an MTP connector. With the installation of a serial protocol in the FPGA, this interface enables a high bandwidth connection between 7070s mounted within the same chassis or over extended distances between chassis.

"The 7070 has many useful capabilities," said Rodger Hosking, vice-president of Pentek. "The optical transceivers provide a direct pipeline to the FPGA for very high bandwidth links to remote sensors or systems. The powerful Virtex-7 handles the most challenging DSP tasks, and installing an FMC transforms the 7070 into a complete I/O subsystem."

Seamless Integration

The Flexor Model 7070 comes preconfigured with a suite of built-in IP functions for data capture, synchronization, time-tagging and formatting. When integrated with a Pentek FMC, such as the Flexor Model 3312 or 3316, the Model 7070 is delivered with factory-installed IP modules optimized for the analog or digital interfaces of each FMC. These can include A/D acquisition engines and D/A waveform generation engines to simplify data capture and signal generation. Together, they provide an ideal turn-key signal interface for radar, communications or general data acquisition applications, eliminating the integration effort typically left for the user when integrating an FMC and carrier.

Development Tools and Software Support

By plugging the Model 7070 PCIe FMC carrier into a Pentek Model 8266 SPARKTM PC development system, developers can immediately start application development. The SPARK system saves engineers the time and expense associated with building and testing a development system and ensures optimum performance of Pentek boards. All SPARK development systems come with software and hardware installed and ready for immediate operation.

While many applications can be satisfied with the board's built-in functions, the Flexor Model 7070 is an ideal development and deployment platform for custom IP. Supported by the Pentek GateFlow® FPGA Design Kit, users have access to the complete factory installed IP at the source level, allowing them to extend or even replace the built in functions.

The Pentek GateXpress® PCIe Configuration Manager supports dynamic FPGA reconfiguration though software commands as part of the runtime application. This provides an efficient way to quickly reload the FPGA, which occurs many times during development. For deployed environments, GateXpress enables reloading the FPGA without the need to reset the host system, ideal for applications that require dynamic access to multiple processing IP algorithms.

The Pentek ReadyFlow® Board Support Package is available for Windows and Linux operating systems. ReadyFlow is provided as a C-callable library, the complete suite of initialization, control and status functions, as well as a rich set of precompiled, ready-to-run-examples, accelerate application development.

Pricing and Availability

For the latest pricing, delivery and available options, please fill out this form and your request will be delivered to the appropriate department. To learn more about our products or to discuss your specific application please contact our sales department at SDL-sales@mrcy.com, 201-818-5900 or contact your local representative.

Product Detail

Photos and Attachments




CONNECT ON SOCIAL:  Follow Us On Facebook Follow Us On LinkedIn Follow Us On Twitter Follow Us On YouTube

Pentek, Inc. • One Park Way, Upper Saddle River, NJ, 07458, USA
Tel: +1 (201) 818-5900 • Fax: +1 (201) 818-5904 • Map + Directions • Site Map
Terms of Use • Privacy Policy • Copyright © 2024 Pentek, Inc. All Rights Reserved.