Your Pentek With YourPentek, you can be notified when new documentation and other updated product information is available for the Model 7742-428.
Please login or register to manage your profile.

Model 7742-428 GateFlow Transceiver with Multiband DDC and Interpolation Filter - PCIe

This product is no longer available. Contact Pentek for additional information.

Block Diagram



Development Systems


Life Cycle Management

Ordering & Warranty


  • Complete software radio transceiver solution
  • GateFlow IP Core 428, with four high-performance multiband DDCs and one Interpolation Filters, factory-installed
  • Two sets of 18-bit userprogrammable FIR filter coefficients
  • Decimation range from 2 to 65,536 in steps of 1
  • Interpolation range from 2 to 32,768 in steps of 4


Model 7742-428


Model 7742-428 Block Diagram

Hardware and Software Manuals - ( top )

Please note that some hardware and software manuals are used for more than one Pentek product. Although the model numbers given in the description of each manual below may vary, these manuals are all used for the product described on this web page.

Part No.
800.71420 Operating Manual Model 7142 Four Channel A/D with DAC PMC/XMC Module B10 (8/1/2014)
800.77420 Installation Guide Model 7742 Multichannel Transceiver Dual PCIe Board A (4/12/2010)
800.7x421 Addendum Model 7x42 Series -Option 428, Multiband DDC A.1 (4/19/2010)
801.71421 Programmer's Reference Model 4999 Option 142, ReadyFlow Board Support Libraries for Model 7142 1.1 (3/18/2008)
801.71423 Addendum Model 4999 Opt. 142-428 for 7142 ReadyFlow Programmer's Reference Guide 1.0 (6/5/2012)
809.7x420 Supplemental Manual Vendor Data Sheets for Model 7x42 Series Operating Manuals A (11/18/2008)
815.71421 User's Guide Model 4995A Option 142-428 Windows ReadyFlow BSP for Model 7142 Option 428 1.1 (12/8/2009)
816.71421 User's Guide Model 4994A Option 142-428 Linux ReadyFlow BSP for Model 7142 Option 428 1.0 (6/4/2012)