3
Pentek Homepage
Follow Us On LinkedIn Follow Us On Twitter Follow Us On YouTube Follow Us On Facebook Register AccountRegister Login AccountSign In
Board Selector   |  Recorder Selector   |  
Search:  

Your Pentek With YourPentek, you can be notified when new documentation and other updated product information is available for the Model 4290. Please login or register to manage your profile.

Model 4290 Configurable Quad TMS320C6201 Processor

This product is no longer available for new designs.

Block Diagram

Datasheet

Manuals

Literature

Life Cycle Management

Ordering & Warranty

Catalogs

Free Lifetime Support

 
  • Four TMS320C6201 fixed-point DSP's operating at 200 MHz
  • 6400 MIPS performance
  • Memory resources for each processor:
    • 16 MB SDRAM
    • 512 kB zero-wait sync burst SRAM
    • 256 kB dual port SRAM
  • I/O resources for each processor:
    • Two serial full-duplex ports for VIM I/O
    • Read/write memory access to VIM mezzanine
    • 2 x 1k x 32 bidirectional FIFO for VIM mezzanine board I/O
    • 2 x 1k x 32 bidirectional FIFO for interprocessor communication
  • Global bus resources accessible by all processors and VMEbus:
    • Four 256 kB dual port SRAM's
    • 8 kB of fast, non-volatile SRAM
    • 8 MB flash memory for 'C6201 boot code and user applications
    • 2 MB global SRAM for sharing common data
    • Memory-mapped slave expansion for other memory and I/O
  • Host port for all four processors
  • Data transfer rates up to 400 MB/sec
  • VIM interface adapters for application-specific front panel I/O
  • Optional P2 interfaces: RACEway, VSB, custom I/O
  • VME64 master/slave interface
  • VME memory-mapped J-TAG controller
  • Development tools for UNIX and Windows 95/98/NT workstations

 

Model 4290

 

Model 4290 Block Diagram

Please refer to the product datasheet for a larger version of the block diagram


Hardware and Software Manuals - ( top )

Please note that some hardware and software manuals are used for more than one Pentek product. Although the model numbers given in the description of each manual below may vary, these manuals are all used for the product described on this web page.

Part No.
Type
Description
Revision/Date
800.00002 Miscellaneous VIM Specification E (6/10/2004)
800.42900 Operating Manual Operating Manual for Model 4290 and 4291 D (10/29/2002)
800.42908 Release Note Upgrading Model 4290's Boot Firmware B (12/8/2000)
800.42909 Release Note Inital Setup Preliminary (3/1/1999)
801.42900 User's Guide Model 4999 ReadyFlow Board Support Libraries for Models 4290/4291 2.3A (7/6/2004)
801.62000 User's Guide Model 4999 ReadyFlow Board Support Libraries for Pentek VIM Modules 2.1 (11/28/2000)
801.62670 User's Guide Model 4999 ReadyFlow Board Support Libraries for TMS320c62x/c67x Processors 1.1 (11/28/2000)



CONNECT ON SOCIAL:  Follow Us On Facebook Follow Us On LinkedIn Follow Us On Twitter Follow Us On YouTube

Pentek, Inc. • One Park Way, Upper Saddle River, NJ, 07458, USA
Tel: +1 (201) 818-5900 • Fax: +1 (201) 818-5904 • Map + Directions • Site Map
Terms of Use • Privacy Policy • Copyright © 2024 Pentek, Inc. All Rights Reserved.